User`s guide

Hardware Options
E-32 Modem 3600
Factory Option Set #5
(Asynchronous 4-wire Leased Line with V.42bis Protocol)
(AT&F5)
MODEM OPTIONS TEST OPTIONS
DCE rate - 33600 Bilateral digital loop disabled
V.34 modulation * DTE local test disabled
V.34 rate threshold high DTE remote test disabled
V.34 asymmetric rate enabled Remote commanded test enabled
Normal originate Test timeout off
Fast train disabled
Auto retrain enabled DIAL LINE OPTIONS
SQ auto rate disabled Tone dial
Transmit clock internal Auto dial #1
Leased line, 4-wire * Wait for dial tone
Transmit level - 0 dBm * Wait delay 2 seconds
Dial backup manual * Pause delay 2 seconds
Lookback timer - 15 min * Call timeout 30 seconds
Jack type RJ11 Answer on 1 ring
Line current disconnect long Autocallback disabled
Long space disconnect enabled
V.22 guard tone disabled DTE OPTIONS
Async data
PROTOCOL OPTIONS DTE rate - 115200
LAPM protocol enabled 8 bit, no parity
MNP protocol disabled * AT command set enabled
Protocol fallback disabled * Ignores DTR *
Data compression normal DSR forced high
Constant DTE speed DCD normal
DTE flow control RTS CTS forced high
DCE flow control CTS DTE fallback disabled
XON/XOFF pass through disabled Options retained at disconnect
Inactivity timer off
Break control 5
V.42 fast detect enabled
SPEAKER OPTIONS
Vo l u m e l ow
On until carrier detect
*
Indicates variation from factory option set #1