User`s guide

Index
V.3600 Index-3
Configuration profile 5-40
Connect messages
s-register settings 10-10
Constant speed interface 6-2
Cover
removal of C-1
CTS
s-register settings 10-9
CTS control
Clear to send (CTS) 10-9
CTS flow control
s-register settings 10-16
CTS follows DCD option
s-register settings 10-24
CTS/RTS flow control 10-16
D
Data compression 6-2
V.42 bis 6-12
Data link flow control 6-8
Data rates A-2
DCD
s-register settings 10-9
DCD control
Data carrier detect (DCD) control
10-9
DCE speed
s-register settings 10-21
Dial
pulse ratio 5-26
Dial backup
s-register settings 10-13
Dial modifiers
"!" 5-15
P 5-14
R 5-15
Sn 5-16
Dial, tone/pulse
s-register settings 10-7
Dialing 3-2
Digital interface
specifications A-1
Digital loopback 10-8
Direct mode 6-3, 6-10
Disconnect
buffer delay 6-4
fast 5-23
long space 5-25
Distinctive ring 5-18
DSR
s-register settings 10-9
DSR control
Data set ready (DSR) control 10-9
DTE
connection of 2-2
serial port adjust 6-5
DTE fallback
S-register enable/disable 10-12
DTE flow control
s-register settings 10-16
DTE/DCE constant speed
s-register settings 10-24
DTR
s-register settings 10-9
DTR control
Data terminal ready (DTR) control
10-9
DTR dialer
s-register settings 10-11
DTR in autoanswer 5-17
E
Echo 10-7
local character 5-22
online character 5-23
EIA-578 9-1, 9-3
Environmental conditions A-1
Error control 6-1
Escape sequence
Changing from data mode to
command mode 5-22
F
Factory option set
loading 5-39