User`s guide

Modem 3600
2-1
Chapter 2
Installation
This chapter provides information on mechanical and electrical
installation of the modem.
Mounting Accessories
We have included both self-adhesive feet and an adhesive-backed hook
and loop fastener. The feet are for use when the module will be resting on
a surface; the hook and loop is useful when mounting the modem to a PC
or monitor housing or other flat surface.
To install the feet, peel them from the paper backing and place one foot at
each corner of the bottom of the module. To use the hook and loop
fastener, peel the plastic backing from one side and stick to the bottom of
the module; peel the backing from the remaining piece and press the
module firmly to the mounting surface.Once installed using the hook and
loop fastener, the module may be removed from the mounting surface by
grasping the unit and pulling firmly away from the mounting surface. To
re-mount, align the hook and loop halves and press firmly together.