ServSwitch User's Manual

34
MATRIX SERVSWITCH™
3.3.9 S WITCHING AND A CCESSING THE D ISPLAY FROM THE K EYBOARD
If your Matrix ServSwitch system has been properly preconfigured (see
Section 3.6), it is now ready for operation using its default settings.
To take full advantage of the Switch’s keyboard-command features, refer to
Chapter 6, which gives detailed information about each of the Switch commands,
describing each command’s function and keystroke sequence. For your
convenience, this information is summarized in Section 6.1.
To begin switching immediately, however, just press and release your keyboard’s
left Control Key ([Ctrl]), then—within the next two seconds—type in your desired
port number with the regular number keys (not the numeric keypad) and press
[Enter]. Or, to review the configuration settings of your Matrix ServSwitch system,
press and release left [Ctrl] followed within two seconds by the [F12] key; this will
bring up the Switch’s on-screen display (see Chapter 4).