ServSwitch User's Manual

MATRIX SERVSWITCH™

4. Full Configuration

Once your Matrix ServSwitch system is up and running, you can configure the

system from any attached user station (monitor, keyboard, and mouse). To do so,

press and release the left [Ctrl] key, then press the [F12] key to access the

configuration-menu screen shown in Figure 4-1. (After your initial access, if you’ve

set a configuration password, a text box prompts for it.) The configuration menu

displays on top of the currently connected computer’s screen if you are switched to

a computer with active video. If no computer is supplying video, the background is

black. If the display is not synchronized, switch to a computer with active video,

and change the on-screen display-resolution setting using the Configure KVM page

(see Section 4.4).

Figure 4-1. The configuration menu.

Configure password box numbers, keyboard settings, appearanc

Main menu

Configure

System

Computer

KVM

User

Profile

Group

Status

Save

Exit

Use arrow keys to highlight

selection and press enter or

press escape to exit

System