Instructions / Assembly

Page 11

SET UP & USE

INSTALLING THE GUARDRAIL

Following these steps below to install the guardrail.

1. Place the guardrail on top of the cabinet.

2. Align all support feet of the guardrail with the holes on the top of the unit.

INSTALLING THE CO REGULATOR AND THE CO CYLINDER

Follow these steps to safely install the CO regulator and CO cylinder. You must read

and understand the following procedures for the CO cylinders before installation.

NOTE: Your CO cylinder has DOT (USA Department of Transportation) approval,

however the cylinder has been shipped empty to avoid any possible accidents

during transportation. When you purchase the first keg of beer, you must also

have your CO cylinder filled at your local supplier.

1. Install the CO gas line tube to the regulator by attaching one end of the tube to

the hose barb connection on the CO regulator. (See illustration E)

2. Attach the regulator to the CO cylinder by screwing the regulator nut onto the

cylinder valve and tightening with an adjustable wrench. (See illustration F)