Trimmer User Manual

TROUBLESHOOTING

Problem Possible Cause Possible Solution

• Battery wonʼt charge. • Charger not plugged into a working outlet. • Plug charger into a working outlet. Refer to

or not plugged into shear shrubber. “Important Charging Notes” for more details.

• Check current at receptacle by plugging in a

lamp or other appliance.

• Check to see if receptacle is connected to a

light switch which turns power off when you turn

out the lights.

• Charger plug not fully inserted into tool socket. • Check to be sure charger plug is fully inserted

into tool charging socket.

• Surrounding air temperature too hot or too cold. • Move charger and tool to a surrounding air

temperature of above 40 degree F(4.5°C) or

below 105 degree F (+40.5°C).

For assistance, visit our website www.blackanddecker.com for the location of the service center nearest you or call the BLACK &

DECKER help line at 1-800-544-6986.

See ‘Tools-Electric’

– Yellow Pages –

for Service & Sales

Imported by

Black & Decker (U.S.) Inc.,

701 E. Joppa Rd.

Towson, MD 21286 U.S.A.