Operation Manual

6
ENGLISH
ANGLE GRINDER
KG68/KG70/KG75/CD500
CONGRATULATIONS!
You have chosen a Black & Decker tool. Our aim is
to provide quality tools at an affordable price.
We hope that you will enjoy using this tool for
many years.
EC DECLARATION OF CONFORMITY
KG68/KG70/KG75/CD500
Black & Decker declares that these
products conform to:
98/37/EC, 89/336/EEC, 73/23/EEC,
EN 50144, EN 55014, EN 61000
Level of sound pressure, measured according to
EN 50144:
L
pA
(sound pressure) dB(A) 89.9
L
WA
(acoustic power) dB(A) 102.9
Always wear ear protection if the sound
pressure exceeds 85 dB(A).
Hand/arm weighted vibration value according to
EN 50144:
< 2.5 m/s
2
Brian Cooke
Director of Engineering
Spennymoor, County Durham DL16 6JG,
United Kingdom
INTENDED USE
Your Black & Decker angle grinder has been
designed for cutting metal and masonry using the
appropriate type of cutting or grinding disc. It is
also suitable for sanding using a backing pad and
sanding disc.
This tool is intended for consumer use only.
SAFETY INSTRUCTIONS
Warning symbols
The following symbols are used in this manual:
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Denotes risk of electric shock.
Read the manual prior to operation.
Fire hazard.
Know your tool
◆ Warning! When using mains-powered
tools, basic safety precautions,
including the following, should always
be followed to reduce the risk of fire,
electric shock, personal injury and
material damage.
◆ Read all of this manual carefully before
operating the tool.
◆ Before operating the tool, make sure
that you know how to switch the tool off
in an emergency.
◆ Retain this manual for future reference.
SAG.P65 17-07-2001, 14:516