Installation guide

BlackDiamond 20808 Switch Hardware Installation Guide
125
B Technical Specifications
This appendix contains the following specifications:
● BlackDiamond 20808 Switch Specifications on page 125
● Power Supply Specifications on page 127
● Connector Pinouts on page 128
BlackDiamond 20808 Switch Specifications
Table 11: BlackDiamond 20808 Switch Technical Specifications
Physical Dimensions
BlackDiamond 20808 chassis Height: 25.33 inches (64.34 cm)
Width (without rack-mounting brackets): 17.55 inches (44.58 cm)
Width (with rack-mounting brackets): 17.70 inches (44.96 cm)
Depth (including fan covers): 28.9 inches (73.3 cm)
Weight
BlackDiamond 20808 chassis
(as shipped)
165 lb (74.8 kg)
BlackDiamond 20808 chassis
(fully loaded)
307.5 lb (139.5 kg)
BlackDiamond 20808 fan tray 12.25 lb (5.55 kg)
2400 W AC Power Supply 6 lb (2.72 kg)
1900 W DC Power Supply 6 lb (2.72 kg)
MM-Base management module 6.5 lb (2.95 kg)
MM-Adv management module 9.5 lb (4.31 kg)
XM-8XB I/O module 13 lb (5.9 kg)
GM-40XB I/O module 7.25 lb (3.3 kg)
GM-40XA I/O module 7.25 lb (3.3 kg)
XFM-1 switch fabric module 4.25 lb (1.93 kg)
Safety Standards
North American Safety of ITE UL 60950-1:2003 1st Ed., Listed Device (US)
CSA 22.2#60950-1-03 1st Ed.(Canada)
Complies with FCC 21CFR Chapter1, Subchapter (US Laser Safety)
CDRH Letter of Approval (US FDA Approval)
NOM/NYCE (Mexico)
IEEE 802.3af 6-2003 Environment A for PoE Applications
European Safety of ITE EN 60950-1:2001 (GS Mark)
EN 60825-1+A2:2001 (Lasers Safety)
73/23/EEC Low Voltage Directive
International Safety of ITE CB Report & Certificate per IEC 60950-1:2001 + All Country Difference
AS/NZX 60950-1 (Australia /New Zealand)