Installation guide

Installing the BlackDiamond 20808 Chassis
BlackDiamond 20808 Switch Hardware Installation Guide
48
2 Open the top flaps of the box and remove the support brackets, boxed accessories, and customer
materials package (Figure 15). Lay these items aside until they are needed.
Figure 15: Removing the Accessories
3 Remove the top packing foam pieces.
4 Lift the box off the shipping pallet with the chassis.
Figure 16: Removing the Top Packing Foam
5 Open the top of the chassis packing bag and slide the bag down around the base of the chassis.
At this point the chassis is ready to be lifted out of the lower packing foam and installed in an
equipment rack.