Installation guide

Installing the BlackDiamond 20808 Chassis
BlackDiamond 20808 Switch Hardware Installation Guide
50
For an installation in a 4-post rack, you can install the second support bracket across the rear rack
posts.
Figure 17: Attaching the Support Bracket
3 From the front of the rack, lift the back of the empty BlackDiamond 20808 chassis onto the support
bracket.
4 Slowly guide the chassis into the equipment rack until the mounting brackets are flush against the
rack uprights.
5 Secure the chassis to the equipment rack using 12 rack mounting screws. (Screws are not provided.)
Be sure that the screws are secure. Refer to Figure 18 for the screw locations.
EX_086B