Installation guide

Front-Mounting a BlackDiamond 20808 Chassis
BlackDiamond 20808 Switch Hardware Installation Guide
51
Figure 18: Securing the Chassis to the Rack
6 Attach the PSU air baffles to the sides of the chassis, following the instructions in “Attaching the
PSU Air Baffles” on page 54.
CAUTION
Properly installed PSU air baffles prevent the hot PSU exhaust of one system from being drawn into the PSU air
intake of an adjacent system, and therefore protect against premature thermal shutdown of the PSU or early power
supply failure. For all installations where two or more BlackDiamond 20808 switches are installed next to each
other, you must install the PSU air baffles.
BD_197