Installation guide

Installing the BlackDiamond 20808 Chassis
BlackDiamond 20808 Switch Hardware Installation Guide
52
Mid-Mounting a BlackDiamond 20808 Chassis
To mid-mount a BlackDiamond 20808 chassis:
1 On each side of the chassis, align a mid-mount brackets with its mounting holes on the chassis sheet
metal.
2 Using a #2 Phillips screwdriver, insert and tighten the mounting screws to secure the bracket to the
chassis (Figure 19).
Figure 19: Attaching a Mid-mount Bracket
3 Identify the rack location where the chassis will be installed.
BD_198