Installation guide

Mid-Mounting a BlackDiamond 20808 Chassis
BlackDiamond 20808 Switch Hardware Installation Guide
53
4 Using four rack mounting screws, attach the support bracket to the equipment rack immediately
below the chassis location (Figure 20). (Screws are not provided.)
To provide wider support for the chassis as you install it, you can attach the second support bracket
on the other side of the rack post.
Figure 20: Attaching the Support Bracket
5 From the front of the rack, lift the back of the empty BlackDiamond 20808 chassis onto the support
bracket.
6 Slowly guide the chassis into the equipment rack until the mounting brackets are flush against the
rack uprights.
EX_086B