Installation guide

Installing the BlackDiamond 20808 Modules
BlackDiamond 20808 Switch Hardware Installation Guide
78
3 Simultaneously rotate the injector/ejector levers away from each other to release the module from
the chassis slot (Figure 46).
Figure 46: Unseating a Module (Management Module Shown)
CAUTION
To prevent ESD damage, hold the module by the metal panel edges only. Never touch the components on the
PCB or the pins on any of the connectors.
4 Carefully slide the module out of the chassis slot (Figure 47).
BlackDiamond modules are heavy. Support the bottom edge of the module as you pull it out of the
chassis.
BD_188