Installation guide

Installing the BlackDiamond 20808 Modules
BlackDiamond 20808 Switch Hardware Installation Guide
84
Figure 52: Loosening the Retaining Screws on the Switch Fabric Module
3 Simultaneously rotate the injector/ejector levers away from each other to release the module from
the chassis slot (Figure 53).
Figure 53: Removing a Switch Fabric Module
CAUTION
To prevent ESD damage, hold the module by the metal panel edges only. Never touch the components on the
PCB or the pins on any of the connectors.
4 Carefully slide the module out of the chassis slot.
5 Place the module into the ESD bag to protect it from potential ESD damage. This will also prevent
dust from collecting on the module connectors.
BD_196
BD_192