Installation guide

Cable Management Accessories
BlackDiamond 20808 Switch Hardware Installation Guide
98
Figure 63: Connecting Cable Holders
2 Slide the ends together and push the cable holders together until you feel them snap into place (see
Figure 64).
Figure 64: Connected Cable Holders
3 Connect as many cable holders together as you need to manage your cable bundles.
4 To disconnect the holders, grasp one in each hand firmly and carefully pull them apart.
Connecting Cable Clips
To connect the cable clips:
1 Hold two clips next to each other with the split sides facing the same way (see Figure 65).
2 Slide the connecting grooves together (see Figure 65).
ENIN003
ENIN004