Product Brochure
13
E-Z-GROUND GROUNDING CONNECTORS
Perform line tap-offs, dead-ending and grounding
on a range of conductors.
• Can be held in the dies or jaws of an installation
tool, then hooked directly over the line for time-
saving installations
• Manufactured from pure electrical-grade
copper for a highly conductive, low resistance,
reliable connection
• Die references marked on connector
for easy identification
•
CC 4040
—
Copper C-type compression taps
Cat. no.
Wire range (AWG)
Installing dies
Length
(in.)A groove B groove
TU, BG,
TM or C
E or O
* When using #1 str. in the A Groove, the B Groove will accommodate #6 or #8 Str. or #8 Sol.
Note: For tin-plating option, add “-TN” suffix to the catalog number.
Hex compression intimately bonds cable directly
to ground rod.
• Figure-8 connectors
• Conforms to IEEE 837 standard
• UL
®
467 Listed
Cat. no. Cable range (AWG) Ground rod (in.) Die code for TBM14M, 13100A or TBM15I
For tooling and die selector chart, see the Color-Keyed compression connectors catalog.
—
to ground rod for direct
burial or in concrete,
the connector shall be
wrought copper with
minimum conductivity
of 99% I.A.C.S., such as
Hex compression with
die code embossing
shall be used.
—
Copperweld-copper conductor
—
E-Z-Ground
™
grounding connectors
Copper C-type compression taps & pigtail connectors
—
Pigtail connectors
—
01
Meets IEEE 837
requirements
DB