User`s guide

5
The Front Panel
1. INPUT: Use this jack to connect your
guitar to the amplifier using a high-qual
-
ity shielded instrument cable.
2. DRIVE: Use this to adjust the amp gain
of the amplifier.
3. LEVEL: Use this to adjust the output
volume of the amplifier.
4. TREBLE: Use this to adjust the output
level of the high frequencies. The adjust
-
ment range is +14 dB at 10 kHz.
5. MIDDLE: Use this to adjust the output
level of the mid frequencies. The adjust
-
ment range is +6 dB at 1 kHz.
6. BASS: Use this to adjust the output
level of the low frequencies. The adjust
-
ment range is +10 dB at 100 Hz.
7. PRESENCE: Use this to boost high
frequency response and overall punch
of the output section. The adjustment
range is +28dB at 20 kHz.
8. INDICATOR LAMP: This illuminates
when the amplifier is turned on (power,
that is).
9. 15 WATTS/7 WATTS: This is the
Pentode/Triode switch. It allows you
to operate the amplifier in two distinct
modes of operation and output power
rating. The Pentode is the aggressive
setting that gives you full output power
of 15 watts RMS. The Triode is a gen
-
tler setting with more head room that
reduces the output power to 7 watts
RMS.
10. ON/OFF SWITCH: Use this switch to
turn the amplifier on and off.
PRESENCE
15 WATTS ON
7 WATTS OFF
BASSMIDDLETREBLELEVELDRIVE
INPUT
H
A
N
D
S
O
M
E
D
E
V
I
L
0 10 0 10 0 10 0 10 0 10 0 10
15
BH15-112
1 2 3 4 5 6 7 8 9 10