User guide

ROAD ANGEL and

your Motorbike

Protecting and

Cleaning

ROAD ANGEL

Database & Updating

System

Requirements

Subscriptions

Hardwiring

ROAD ANGEL

Hardwiring ROAD ANGEL

ROAD ANGEL power cable can be hard wired into the vehicle

permanently. If you use lots of different products in the car this will free

up the cigar socket.The straight cable supplied in the box can be used by

removing the cigar socket. It must have its own 3A fuse in line. If you are

unsure on how to carry out the procedure then we highly recommend

using an auto electrician.

ROAD ANGEL and your Motorbike

The windscreen mounting bracket can be used to mount under the

screen of a sport bike. ROAD ANGEL can be fitted to any bike with 12V

electrics.An optional earpiece provides audible warnings inside your

helmet. ROAD ANGEL is NOT waterproof. If it is going to be used in all

weathers then a tank bag or another type of waterproof holder is

recommended.

An optional rear number plate sensor is available separately – please

contact Blackspot Interactive Ltd. For details. In cases where bikes

have a high level of electrical interference, you may get false alarms.

Please route all cables away from the ignition circuit of the bike.

Protecting and Cleaning ROAD ANGEL

Your unit is made from tough polycarbonate moulded plastic and is

designed to withstand normal daily handling. Only clean with a dry or

slightly damp cloth. Do not use solvents or a wet cloth. When cleaning

the LCD display, avoid pressing too hard as this may damage the display.

Avoid water or very damp conditions, extremes of heat (60c) or cold

(-10c) and dropping the unit.We recommend removing ROAD ANGEL,

with its bracket from the dashboard if the vehicle is parked for long

periods in direct sunlight.