User guide

Setting Up
How ROAD ANGEL
Works
Setting Up
Fitting ROAD ANGEL with LASER ALERT in your vehicle.
1. Empty all the parts out of the box and familiarise yourself with
each item.
2. We highly recommend that ROAD ANGEL is positioned in the centre
of the front windscreen low down, just above the dashboard. Making
sure that the windscreen wipers do not obstruct the view.Tests with
enforcement teams have shown that this is the most effective place to
mount a single detector.Above 200m this has proved to warn every
time the vehicle was targeted (tested with a standard saloon car).
If the Laser Gun is targeting your number plate at less than 200m it is
likely that a dashboard mounted ROAD ANGEL WILL NOT detect the
signal.At 200m the beam of the laser can be as little as 200mm. If the
windscreen wipers sit low, then the unit can be mounted straight
onto the dashboard.This is due to the unit needing a clear view front
and rear to detect laser.
4
1
3
4
5
6
7
9
8
2
1. Straight Power Lead
2. Sprung Power Lead
3. Dash Pad
4. USB Cable
5. Windscreen Bracket
6. Anti-vibration Damper
7. Suction Cups
8. ROAD ANGEL
9. Anti-glare Visor