User guide

3. ROAD ANGEL has a quick release magnetic base, and is supplied with a
bracket that can be mounted on the front windscreen.A pad can also be
affixed directly onto the dashboard.
Windscreen Mount Bracket – Insert the two
clear suction cups into the holes on the back of
the bracket. Next, insert the ant-vibration
dampers into the small holes in the back, to stop
it touching the windscreen. ROAD ANGEL can be
placed onto the rubber pad where the magnetic
base will hold it firmly. Do not leave the bracket
on the front windscreen without the product
attached, for security issues.
Dashboard Pad – Remove the backing from the bottom of the pad and affix to
the dashboard where you wish ROAD ANGEL to be placed. ROAD ANGEL can be
placed onto the rubber pad where it will be held firmly.
4. Routing the Power cable – ROAD ANGEL is supplied with two types of power
cable. Choose which cable suits your vehicle the best.When routing the cable
ensure that it does not interfere with any of the vehicles controls or airbag
modules. If you use your cigar socket for any other devices a dual adaptor
may be used.
5. Park your vehicle outside with a clear view of the sky through your
windscreen (clear of obstacles such as tall buildings and over-hanging trees).
Obstacles may delay or prevent satellite acquisition.
6. Plug the power lead into the cigar lighter socket. If your socket is ignition wired
you will need the ignition to be on.The unit will beep and then the display will
light up going between the blue and the red backlights.The display will
illuminate red with ‘PLEASE REGISTER’ showing. Press any button to clear this
screen, once an update has been carried out, this message will not appear again.
5
Caution: NO ROAD ANGEL, OR ASSOCIATED ITEMS SHOULD BE ATTACHED TO OR PLACED ACROSS
THE PADDED SURFACE OF THE AIRBAG MODULE ON THE PASSENGER SIDE OF THE DASH PANEL.
ALL WIRING MUST BE TUCKED AWAY AS TO NOT INTERFERE WITH ANY OF THE VEHICLE'S
CONTROLS.