User guide
Camera alert single beep – Switch alert on or off, as each proximity bar
counts up it will emit a single beep.
Safety Alert Volume – Changes the volume setting for Blackspot, School and
Congestion related warnings. 0%-100% in 20% increments.
Safety Alert single beep – Switch alert on or off, as each proximity bar counts
up it will emit a single beep.
Blackspot alert – Switch Blackspot alerts on or off.
School zone alert – Switch School alerts on or off.
Congestion zone alert – Switch Congestion zone entry warnings on or off.
Overspeed alert – Set a speed at which the unit will warn if you exceed the
speed.
Laser alert volume – Changes the volume for laser detection warnings.
0%-100% in 20% increments.
Laser Alert – Turns on or off the internal laser detection. Sensors plugged into
auxiliary socket will still warn.
Slow speed mute – When travelling less than 15MPH the unit will not give an
audible warning. If you enter a zone below 15MPH you will hear a single beep,
followed by the proximity count up.
Speed sensitive volume – Adjust the warning volumes dependent on how fast
the vehicle is travelling.
Distances:
Alert distance – Adjusts the warning range as you approach warnings. 250M,
500M and 1KM.
Speed distance sensitivity – Doubles the advanced warning at 50MPH and
above. Switch on or off.
7