Owner manual
9
5.
Tie the power cable.
N
Use the provided cable holder, if
necessary.
6.
Adjust the position of the camera
lens of the BlackVue.
N
The BLACKVUE logo should be
slightly further down than horizontal.
N
Check the data saved during a test
drive. Adjust the lens position, if
necessary.
N
If you connect a mobile video device
(smart phone/navigation), you can
adjust the angle of the lens viewing
the video. (
See page 10.)
7.
Start the engine. Check whether the
BlackVue is installed correctly.
N
When the BlackVue is installed
correctly, its LED will turn on.
]
Caution When Installing the BlackVue
• Installing or operating the product while you are driving may cause an accident. Stop your
car at a safe location and install or operate the product.
• If you smell any strange smells or the cigarette jack emits smoke, stop using the product
and contact your local product distributor.
• Dust in the cigarette jack may cause excessive heat or fire. Clean it periodically.
• Frequently check whether the main body of the product is installed securely. The BlackVue
may fall due to vibrations and result in personal injury or damage to the product.
• Pittasoft is not liable for any product damage or personal injuries that occur due to an
accident or carelessness.
d