Owner manual

10
Connecting the BlackVue to an AV Product
Video OUT Cable Video IN cable*
1.
Connect the BlackVue’s [AV OUT] terminal to the AV unit using
the Video OUT/IN cable (accessory).
N
You can view the real-time video of the BlackVue through the connected AV
product.
N
You cannot play the files recorded by BlackVue.
N
If you use the [AV OUT] port of BlackVue, the frame rate decreases.
N
However, some navigation systems are not compliant with the provided Video
In* cable. Refer to the user manual for the navigation system to check the
compatibility with the provided Video In cable.
Removing the BlackVue from the Holder
1.
While pressing the [LOCK] button for the holder, pull the main body of the
BlackVue as shown in the figure.
2.
The main body of the BlackVue is easily removed from the holder.
N
Assembling it into the holder : Align the grooves of the main body of the
BlackVue with those of the holder and slide the main body into the holder until
you hear a click.
Using the BlackVue
Installing the BlackVue