Owner manual

12
Using the Event Recording Function
When the vehicle is running or parked, if the BlackVue detects an impact over
a pre-determined threshold, the video of the before and after is automatically
recorded.
N
Go to the setup screen and adjust the settings for [G-Sensor] under Sensitivity.
(

See page 24). It is possible to configure different [G-Sensor] settings for the
normal recording and parking recording functions.
G-Sensor (3 axis acceleration sensor)
• BlackVue detects impact with the G-sensor and recording the video.
• G-sensor is 3-axis gravity acceleration sensor that detects an impact in X (forward and
backward), Y (left and right) and Z axis (upward and downward).
• You can play the G-sensor information of the recorded file by using the BlackVue software.
• The G-sensor value measured by BlackVue cannot be used as an evidence for traffic
accident.
Turning off the BlackVue
Stop the engine.
The BlackVue will turn off after about 5 seconds. All LED indicators of the
BlackVue will turn off.
N
When the POWER MAGIC (a battery power
controller) is connected, separate the power cable
connected to the BlackVue.
Using the BlackVue
Recording