Owner manual

21
BlackVue Software
Configuring Your BlackVue Set-up
1.
Click the button. The Set-up screen is displayed.
2.
Configure your BlackVue Set-up.
3.
Select the drive to which the Micro SD card is connected.
4.
Click the [Save & Close] button.
N
Before clicking the [Save & Close] button, check that you correctly selected
the drive to which the Micro SD card is connected. If the settings are not saved
on the Micro SD card, your configuration of the BlackVue Set-up will not be
performed.
N
To reset the settings to their default values, click the [Reset] button.
5.
Insert the Micro SD card containing the saved Set-up into the BlackVue.
They are applied to the BlackVue automatically.
Setting the Basic
1
2
3
4
]
Select the drive to which a Micro SD card is connected.