Owner manual
7
Inserting / Removing a Micro SD Card
1.
Press the Micro SD card lightly
and slide it into the BlackVue in the
direction shown in the figure.
N
To remove the Micro SD card, press
it lightly and it will eject.
N
Before you insert an SD card into
the BlackVue, turn the BlackVue off.
]
Caution When Using a Micro SD Card
• Insert/Remove the Micro SD card while the BlackVue is turned off.
(Ensure that all the LEDs of the BlackVue are turned off.)
• Do not remove the Micro SD card while the BlackVue is reading or writing data.
This may corrupt the data or result in a product malfunction.
• Check the data stored on the Micro SD card periodically to ensure that the product
operates normally.
• Use a Micro SD card provided by Pittasoft. Using a card from other companies may result
in data corruption or a product malfunction.
• The Micro SD card is an expendable item. Replace it with a new one if it has been used for
an extended period of time.
• Make sure to back up important data to another storage medium. We do not provide a
warranty for any corrupted data that occurs while using the product.
Using the BlackVue
Installing the BlackVue