Operation Manual

24
BlackVue Software
Configuring BlackVue Settings
1.
Insert the Micro SD card into your PC. (X See Page 16)
2.
Press the button, and the Configuration window will appear.
You cannot set configuration if the SD card with the BlackVue Firmware
installed is not connected to the PC.
3.
Customize your BlackVue experience.
4.
Press the [Save & Close] button.
You cannot set configuration for BlackVue if the settings are not saved in
the Micro SD card.
Press the [Initialize Settings] button, and the settings will be initialized.
5.
Remove the Micro SD card with the settings saved from the PC, and
insert the card into the BlackVue.
The settings will be automatically saved into the BlackVue.
BlackVue_Eng_0726.indd 24 2012-07-26 �� 4:00:51