Service manual

XTR Electric Powerboard
Service Manual
www.tanaka-usa.com [e-mail]
Revison 002
9
Steering Head Components / Rigid Fork Model
Figure 9 Figure 10
Disassembly:
First, remove the two bolts, four spacers and lock nuts that secure the forks to the steering head. This requires either a
5mm or 6mm hex wrench, and a 13mm wrench or socket. Remove the lock nuts on the bolts, and gently tap them
through the steering head assembly (Fig. 9). Use caution not to damage the threads as you remove the bolts. With the
entire front wheel and forks removed (Fig. 10), the steering head can now be disassembled.