Service manual

XTR Electric Powerboard
Service Manual
www.tanaka-usa.com [e-mail]
Revison 002
11
Steering Head Components / Suspension Fork Model
Note: The suspension forks used on the XTR-S models are designed to accommodate a wide range of riders
and terrain and are NOT adjustable.
WARNING: Never attempt to disassemble the lower fork tubes. They contain a factory installed spring
under considerable tension. Disassembling the forks will release the spring and cause serious injury or
death.
Figure 13 Figure 14
Front end disassembly:
Begin by separating the top steering stem from the fork assembly by removing the three hex bolts that secure
the clamp bracket around the stem, (fig. 13), followed by removal of the locking nut, (fig. 14).