SDS

Surface Shield
Safety Data Sheet according to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012.
Date of issue: 10/20/2020 Revision date: 10/20/2020 Version: 1.0
2
P102 Keep out of reach of children
P103 Read label before use
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Pressurized container: Do not pierce or burn, even after use.
P264 Wash thoroughly after handling.
Response:
P302 + P350 If on Skin: Gently wash with plenty of soap and water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing.
P337 + P313 If eye irritation persists: Get medical advice/attention
Stogage:
P403 Store in a well ventilated place.
P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F
3. Composition information on ingredients
Ingredients CAS # Percent
Distillates (petroleum), 64742-52-5 35-55%
Hydrotreated heavy napthenic
Liquefied Petroleum Gas 68476-86-8 10-25 %
Petrolatum 8009-03-8 5-10%
Fatty Acids, lanolin 68424-43-1 1-10%
Wool Wax 8020-84-6 5-11%
4. First Aid Measures
Eye Contact:
Flush with warm water for 15 minutes. Seek medical attention if irritation persists
Skin Contact:
Wash with soap and water. Remove any contaminated clothing and launder before reusing. If
irritation persists, seek medical attention.
Inhalation:
Remove exposed individual to fresh air, protecting yourself. Restore breathing if necessary.
Contact a physician.
Ingestion:
Do not induce vomiting. Get medical attention immediately. DO NOT GIVE AN UNCONCIOUS
OR CONVULSING PERSON ANYTHING BY MOUTH!
5. Fire Fighting Measures