SDS
Surface Shield
Safety Data Sheet according to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012.
Date of issue: 10/20/2020 Revision date: 10/20/2020 Version: 1.0
4
Empty containers may contain residues from the product. Treat empty containers with the same precautions
as the material last contained. Do not cut, weld or apply heat to empty containers Do not incinerate
Storage:
Store in a cool, dry area, away form heat or direct sunlight. Keep containers closed when not in use. Do not
store with incompatible materials
8. Exposure Controls / Personal Protection
Protective Equipment:
Use synthetic gloves if necessary, to prevent excessive skin contact. Do not wear contacts and
always use ANSI approved safety glasses or splash shield.
Engineering Controls:
General or dilution ventilation is frequently sufficient as the sole means of controlling employee
exposure. Local ventilation is usually preferred. Use a NIOSH approved respirator if ventilation is
not adequate to maintain exposures below TLV levels.
Respiratory Protection:
Use adequate ventilation to maintain exposure limits. If the exposure limits of the products or any
of its components is exceeded, an approved organic vapor mask should be used (consult your
safety equipment supplier). Above 1000 ppm, an approved self-contained breathing apparatus or
airline respirator with full face-piece is required
Other Suggested Equipment:
Eye wash station and emergency showers should be available. Spill containment equipment should
be available.
Discretion Advised:
We take no responsibility for determining what measures are required for personal protection in
any specific application. The general information should be used with discretion.
Exposure guidelines:
Ingredients CAS # Percent Exposure Limits
Liquefied Petroleum Gas 68476-86-8 5-30 % OSHA (PEL) 1000 ppm
ACGIH TLV 1000 ppm
Distillates (petroleum), 64742-52-5 35-55% ACGIH (TWA) 5 mg/m3
Hydrotreated heavy napthenic OSHA (PEL) 5 mg/m3
9. Physical and Chemical Properties
Appearance: Amber Brown as dispensed from aerosol can. Odor: Light Cedar
Evaporation Rate: >1 (n-Butyl Acetate =1)
PH: NA Melting/Freezing point: NE