Instruction manual

19
TORQUE SETTINGS
(1 FT-LB = 1.3558 Nm)
PART NAME QTY TORQUE SETTING ( Nm ) SECURED BY
ENGINE
Cylinder – Bolts M6 4 10
Flange – M5 4 5
Starter case – 4 3 3
Ratchet wheel –bolt M4 1 3 Loctite 243
Magneto (rotor) – nut M8 1 22
Starter prowls – bolts M5 2 5,5 Loctite 243
Ignition coil – boltsM5 2 5.5
Ignition coil holder – bolt M4 2 3
Engine block – M6 5 15
Clutch disc – nut M8 1 22 Loctite 243
Clutch case – bolts M6 4 10
Reeds - bolts M3 2 0,8 Loctite 243
Float chamber – bolts M4 2 2
Slider cover (carburetor) – bolts M4 2 2
Pinion - M8 1 22 Loctite 243
FRAME
Front wheel axle - nut M10 1 35 Self - locking
Front steering rod – M10 1 20 Self - locking
Handlebar holder – M6 4 10
Engine holder – M6 3 10
Rear wheel axle – nut M10 1 35 Self - locking
Rear brake rotor – M5 3 20.5 Loctite 243
Sprocket – M5 3 20.5
Footboard plastic 4 1.5
Chain guard –M6 2 9
Wheel suspension – nut M 10 2 40 Self - locking
Steering tie rod – nut M 8 4 25 Self - locking
Front axle – nut M6 4 10 Self - locking
Disc – wheel M6 3 10 Self - locking
Exhaust – bolts M6 2 10
Body and seat – tail assy M6 6 6
Rear brake holder M6 1 10
Handlebar lever – M5 1 7,5
Throttle clip (handlebar) – M5 2 5
Brake mount –M5 2 13 Loctite 243