User Manual

60
Additional settings
meric keys 9 while switching on the
device.
The version display with information about
the software appears.
Press the rocker switch
or : to
change between device components.
To exit the version display,
use the rocker switch
or : to
select the "EXIT" menu item.
Press the OK button
2.
The display of the audio source previously
listened to is displayed.
Updating the device software
You can update the software of this device
without removing it. New software versions
can be found on the Internet under www.
blaupunkt.com. The software is transferred
to the device with a USB data carrier.
Note:
Please observe the information obtained
at www.blaupunkt.com for handling the
downloaded file and for installing the
software on your device.
To start the installation,
connect the USB data carrier with the
new software to the device.
Press the MENU button
6.
Press the
rocker switch : to open
the "Syst" system menu.
쏅
쏅
쏅
쏅
쏅
쏅
In the System menu, press the rocker
switch
or : repeatedly until the
"SW DNL" menu item is selected.
Press the OK button
2 to start install-
ing the new software.
쏅
쏅
01BA_HamburgMP68us_gb.indd 6001BA_HamburgMP68us_gb.indd 60 14.03.2008 10:49:16 Uhr14.03.2008 10:49:16 Uhr