User Manual

39
AUX mode
FRANÇAIS ENGLISHESPAÑOL
PORTUGUÊS
中文
한국어
한국어
Press the OK button 2 to call up the
menu item.
Switch between the settings with the
rocker switch
or :.
"MIX AUX" : On.
"MIX AUX" : Off.
Press the OK button
2 to select a dif-
ferent function, or press the DIS•ESC
button
; to exit the menu.
Managing several C‘n‘C devices
Note
This setting is omitted if the current soft-
ware of this device does not yet offer any
C‘n‘C support.
When using suitable adapter cables, you
can connect up to 3 C‘n‘C Blaupunkt inter-
faces to the device. For the device to distin-
guish the different interfaces, you can as-
sign them individual device numbers.
Press the MENU button
6.
Press the
rocker switch : to open
the "Syst" system menu.
Press the rocker switch
or : until
the "C‘N‘C EDIT" menu item is selected.
Press the OK button
2 to call up the
menu item.
The menu displays the 3 C‘n‘C devices "DE-
VICE 1" to "DEVICE 3".
Select a device with the rocker switch
or :.
Press the OK button
2.
쏅
쏅
•
•
쏅
쏅
쏅
쏅
쏅
쏅
쏅
You can now enter the four-digit PIN number
of the device:
Enter the number sequence by press-
ing the corresponding buttons of the
keys
9.
Note:
The PIN of a C‘n‘C device consists of
4 hexadecimal digits. Every digit can
take on 16 different values from 0 to 9
and A to F. To enter the values from A to
F for a digit, press the "2" or "3" button
of the keys as often as required.
After entering one digit, the device auto-
matically switches to the next one. To cor-
rect any entry errors, select the correspond-
ing digit by pressing the rocker switch
or
: again.
After entering the complete PIN number,
press the OK button
2.
쏅
쏅
01BA_HamburgMP68us_gb.indd 3901BA_HamburgMP68us_gb.indd 39 14.03.2008 10:49:03 Uhr14.03.2008 10:49:03 Uhr