PLL Dual Alarm Uhrenradio CLR 40
CLR 40 2
CLR 40 3
CLR 40 4
CLR 40 5
CLR 40 6
CLR 40 7
CLR 40 8
CLR 40 9
CLR 40 10
CLR 40 11
CLR 40 12
CLR 40 13
CLR 40 14
CLR 40 15
CLR 40 16
CLR 40 17
CLR 40 18
CLR 40 19
CLR 40 20
CLR 40 21
CLR 40 Warning TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE LIGHTNING FLASH WITH ARROWHEADSYMBOLwithin an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitude a risk of electric shock to persons.
CLR 40 · Before turning on the power for the first time, make sure the power adaptor is properly connected. For safety reasons, do not remove any covers or attempt to gain access to the inside of the product. Refer any servicing to qualified personnel. Do not attempt to remove any screws, or open the casing of the unit; there are no user serviceable parts inside, refer all servicing to qualified service personnel.
CLR 40 of air through the ventilation openings. 7. HEAT – The appliance should be situated away from heat sources such as radiators, stoves, or other appliances (including amplifiers) that produce heat. 8. POWER SOURCE – the appliance should be connected to power supply only of the type described in the operating instructions or as marked on the appliance. 9.
CLR 40 18. DON'T remove any fixed cover as this may expose dangerous voltages. 19. DON'T place hot objects or naked flame sources such as lighted candles or nightlight on, or close to equipment. High temperatures can melt plastic and lead to fires. 20. DON'T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation. Switch off using the switch on the equipment and make sure that your family knows how to do this.
CLR 40 AC POWER Please check carefully the rated voltage of your appliance matches your local voltage. Plug the AC cord into the standard household electrical socket. BATTERY BACKUP The clock and alarm settings can be protected against AC power failure by 2 “AAA” battery (not included). In the event of a power failure, the display is blank, the clock will continue to operate and the actual time will be maintained. The Clock LCD display and other functions will resume once electrical power is restored. 1.
CLR 40 LOCATION OF CONTROL LCD DISPLAY INDICATION 27
CLR 40 SETTING TIME AND DATE 1. Press & hold SET button for around 2 seconds until the display flash and entered the year setting. 2. Press SCAN+ or SCAN- until the correct year appears in the display. 3. Press SET to confirm 4. Repeat steps 2 and 3 to set the month, day and time. Notes: After setting the minute the clock starts from 0 seconds. But if you do not set "Minute", the clock does not start from 0 second RADIO OPERATION 1. Press the MODE button to turn to radio mode. 2.
CLR 40 SETTING DUAL ALARMS FUNCTIONS Notes • Before setting the alarm time, make sure the Clock has been set • Alarm can only be set in Clock mode only • When setting the alarm to wake up by Radio, Radio station & volume level will be the same as the last radio operation. (See “RADIO OPERATION"). • The ALARM 1 (or Alarm 2) indicator flashes in the display when the alarm sounds. • Alarm 1 (or/and Alarm2) icon appears when the alarm activated, disappear when disabled.
CLR 40 SLEEP TIMER The sleep function allows to play in blocks of 10, 20, 30, 40, 50, 60 70, 80 or 90 minutes before shutting off automatically. When in the Radio mode, press the SLEEP button repeatedly until the desired preset time appears on the display (90, 80, 70, 60, 50, 40, 30, 20 or 10 minutes).
CLR 40 This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of its life separately from your household waste. There are separate collection systems for recycling in the EU. For more information, please contact the local authority or your retailer where you purchased the product. All rights reserved by Blaupunkt Competence Center Audio M3 Electronic GmbH.
