Operation Manual

CLR 40
SETTING DUAL ALARMS FUNCTIONS
Notes
• Before setting the alarm time, make sure the Clock has been set
• Alarm can only be set in Clock mode only
• When setting the alarm to wake up by Radio, Radio station & volume level
will be the same as the last radio operation. (See “RADIO OPERATION").
• The ALARM 1 (or Alarm 2) indicator flashes in the display when the alarm
sounds.
• Alarm 1 (or/and Alarm2) icon appears when the alarm activated, disappear
when disabled. See “TO ACTIVATE / DISABLE ALRM” section for the
operation
• If a second alarm sounds during a first (or the SNOOZE function is active for
the first), the second alarm takes priority.
• If both alarm set to the same alarm time. ALARM 1 takes priority.
• To stop the alarm, please press the related alarm button (AL1 or AL2) once.
To set up Alarm 1 (or Alarm 2),
1. Press AL1 (or AL2) button to enter the alarm mode or for checking the
alarm status. If user does not begin setting or does not press any button
during the alarm setting within 5 seconds, the system will back to the Clock
mode automatically.
2. Alarm sound defaulted as Buzzer. During the alarm setting, user can press
the MODE button to select the alarm sound (Buzzer or Radio)
3. To set the alarm hour, press SCAN+ or SCAN- button until the desired
hour is reached.
4. Press AL1 (or AL2) to confirm
5. Repeat step 3 and 4 to set the desired minute is reached.
TO ACTIVATE/ DISABLE THE ALARM
Before or after setting the alarm time, follow these steps:
• To activate the ALARM 1 (or ALARM 2), press and hold AL1 (or AL2) button
for around 2 seconds the related alarm icon appears. To disable the alarm
press and hold the button for around 2 seconds the icon will disappear
SNOOZE SETTING
The snooze function can be used to stop the alarm temporarily for about 9
minutes once the alarm is activated. When the snooze button is pressed, the
buzzer or radio alarm sounds will stop and will sound again after about 9
minutes.
29