www.blaupunkt.
Controls – Device 1 14 2 13 3 4 5 12 6 7 8 11 9 10 1 button (Eject) Eject a CD/DVD 2 MENU button Short press: Call up main menu In the main menu: Call up menu of active source Long press: Call up Bluetooth® function or switch off display. Function can be selected in the settings menu.
Controls – Remote control 15 44 16 43 17 42 18 41 19 40 20 39 21 38 22 37 23 36 G RPT A-B button Define range for repeat function H RPT button Repeat function I SETUP button Call up settings menu J button Start and interrupt playback Confirm settings K / / / button Navigate in menus and change settings Tuning into stations manually ( / ) Starting station seek tuning ( / ) L button Slow-motion playback 24 35 25 26 34 27 33 28 32 M Number buttons 0 - 9 31 29 30 N / MIX butt
Contents Safety notes ................................................................ 5 Symbols used ...........................................................................5 Road safety ................................................................................5 General safety notes ..............................................................5 Declaration of conformity....................................................5 Cleaning notes ...........................................................
Safety notes | Cleaning notes | Disposal notes Safety notes The car sound system was manufactured according to the state of the art and established safety guidelines. Even so, dangers may occur if you do not observe the safety notes in these instructions. These instructions are intended to familiarise you with the most important functions. Detailed information can be found on the Internet under www.blaupunkt.com. • Read these instructions carefully and completely before using the car sound system.
Scope of delivery | Startup Scope of delivery The scope of delivery includes: • New York • Remote control (incl.
Radio mode Radio mode Start radio mode 쏅 In the main menu, press the Radio button. The radio menu is displayed. Storing stations manually 쏅 Select the desired memory bank with the [ ] button. 쏅 Set the desired station. 쏅 Press the [ ] button. The menu for storing stations is displayed. 6 memory locations are available that are displayed as buttons. 쏅 Press the button under which you want to store the current station. The station is stored, the radio menu is displayed again.
Radio mode The options menu is displayed, the current setting is shown after RDS. Switching the AF (alternative frequencies) function on/off If the AF function is activated, the car sound system automatically tunes into the best receivable frequency for the station that is currently set. 쏅 In the radio menu, press the AF button to switch the AF function on or off. The AF button is illuminated if the AF function is switched on.
Navigation Navigation Loading navigation data The navigation software and map data are located on a MicroSD card. For devices with navigation, the device is delivered with the MicroSD card in the MicroSD card slot. To be able to use the navigation, the MicroSD card must be inserted in the card slot. 쏅 Open the cover of the card slot = next to the DVD/ CD tray. 쏅 Insert the MicroSD card with the printed side up into the slot until it engages. 쏅 Close the cover of the slot.
Navigation The menu for the address entry is displayed. 쏅 Enter the country, city and street in succession as well as the intersection or house number. To do so, press the corresponding entry in the address entry menu. A menu for text entry is displayed. After the route calculation is complete, the parameters of the route, such as distance and time, are displayed. In addition, the entire route is displayed on the map. 쏅 Press Go! to start the route guidance.
Navigation A list of petrol stations in the vicinity of the vehicle is displayed. The petrol stations are sorted by distance to vehicle. Adjusting route options before the route guidance 쏅 Call up the navigation menu. 쏅 Press More…. 쏅 Select a petrol station from the list by pressing on the list entry. The petrol stations is displayed on the map. 쏅 Press Settings. The settings menu for the navigation is displayed. 쏅 Press Next. The route course and the route data are displayed.
Navigation Changing route options during route guidance 쏅 During a route guidance, press the More button. 쏅 Press Route Settings. The route settings are displayed. 쏅 Change the settings, if necessary. 쏅 Press Back. The route guidance is displayed again. Map Settings With the map settings, you can adjust the view mode (2D or 3D), the viewing angle of the map, the colours and the display of buildings and points of orientation on the map.
DVD/CD/USB/SDHC/iPod media playback DVD/CD/USB/SDHC/iPod media playback • Basic information DVD/CD mode The New York can be used to play audio DVDs/CDs (CDDA) and DVD/CD-R/RWs with audio, MP3 or WMA files as well as MP3 or WMA files on USB data carriers and SDHC cards. In addition, you can view movies and images from DVDs/ VCDs/CDs, USB data carriers and SDHC cards on the display or a connected monitor (Rear Seat Entertainment - RSE).
DVD/CD/USB/SDHC/iPod media playback SDHC cards The playback menu is shown. This device features an SDHC card slot under the cover at the front of the device. Inserting the SDHC card 쏅 Open the cover 8 underneath the rotary/pushbutton. 쏅 Insert the SDHC card with its labelled side to the left (flattened corner to the top) and its contacts first into the card slot 9 until it clicks into place. The device automatically switches to SDHC mode.
DVD/CD/USB/SDHC/iPod media playback Audio playback of DVD/CD, USB, SDHC or iPod/iPhone The principles of the audio playback (MP3/WMA) from data carriers or iPod®/iPhone® are identical for all sources. 쏅 Select the desired source via the main menu. If the playback starts with image or video files, 쏅 press the [ ] button to change to the audio playback. The folders of the data carrier containing audio files are displayed. [ Audio playback from DVD/CD, USB or SDHC: ] Start and end REPEAT function.
DVD/CD/USB/SDHC/iPod media playback Video playback from DVD/CD, USB or SDHC Second page of playback menu. 쏅 Select the desired source via the main menu. If the playback starts with audio or image files, 쏅 press the [ ] button to change to the video playback. The folders of the data carrier containing movie files are displayed. [ [ [ [ [ Note: Folders and titles are selected and started as described under audio playback. If you selected a movie, the playback is started.
Bluetooth mode Bluetooth mode Registering Bluetooth devices The Bluetooth® function allows registering cell phones and media playback devices with the New York. When you register a cell phone with the New York, you can make phone calls with the built-in hands-free function. You can access the lists of dialled numbers and the phone book of the registered cell phone.
Bluetooth mode If a call is coming in, the call menu is displayed. Bluetooth settings In the options menu for Bluetooth®, you can make the basic settings for the Bluetooth® mode. 쏅 In the Bluetooth® menu, press the [ ] button. The options menu is displayed. [ ] Answer a call. ] Reject a call. [ If a second call arrives during a phone call, you have the following options: 쏅 Press the [ ] button to pause the active call and to answer the incoming call.
Rear Seat Entertainment | External audio/video sources Rear Seat Entertainment (RSE) External audio/video sources The New York features outputs to connect two external monitors and audio outputs for the rear area of the vehicle. Since a different programme can be displayed on the external monitors than on the device, it is possible to view images and movies on an external monitor while driving. The audio playback for the RSE is established via the sockets Rear Out R and Rear Out L.
Sound settings | Basic settings Sound settings Volume distribution (fader/balance) You can adjust the volume distribution in the vehicle for all sources. 쏅 In the main menu, press the [ ] button. The equalizer menu is displayed. 쏅 Press the [ ] button. The menu for fader and balance is displayed. 쏅 Adjust fader and balance with [ ] / [ ] or [ ] / [ ]. 쏅 Next press on Equalizer. The setting is stored, the main menu is displayed again. Equalizer You can adjust the equalizer for all sources. ] button.
Basic settings General Time The following settings are possible: Radio region – Select the reception region for the radio reception. Background light off – If this value is set, the display of the radio is completely switched off after 10 or 20 sec. without use. Dimmer mode – Adjust the display brightness Beep – Switch confirmation beep on/off Wallpaper – Select the wallpaper for menus. Various motifs can be selected in the device.
Basic settings Language DVD The following settings are possible: On screen display – Language for the user interface of the New York. DVD audio – The audio playback of DVDs is started in the language defined here. DVD subtitle – The subtitles of DVDs are shown in the language defined here. Disc menu – The DVD menu is displayed in the language defined here. The following settings are possible: Set password – Define a password if you want to use the parental controls.
Useful information Useful information Warranty We provide a manufacturer's warranty for products bought within the European Union. For devices purchased outside the European Union, the warranty terms issued by our respective responsible domestic agency are valid. The warranty terms can be called up from www.blaupunkt.com. Service If you ever need to use a repair service, you will find information about service partners in your country under www.blaupunkt.com.
Connection diagram 24
Appendix Supported iPod/iPhone devices FCC Statement Our product can support below listed iPod/iPhone generations: • iPhone 4S • iPhone 4 • iPod touch (4th generation) • iPod nano (6th generation) • iPod nano (5th generation) • iPod classic 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference.
Blaupunkt Europe GmbH Robert-Bosch-Straße 200 D-31139 Hildesheim http://www.blaupunkt.
