Operating instructions

10
To recall a station: Select the desired
waveband. On FM, adjust the corre-
sponding memory bank and press the
relevant preset button briefly.
Extra function preset buttons
To store and recall a PTY program
type.
On FM, you can store and recall one
program type on/from each preset but-
ton when PTY is active (“PTY” lights
up in the display).
A CD slot
When inserting a disc with the label
side facing up, it will be pulled in auto-
matically and transported to the play-
back position. CD playback is adjusted
automatically.
B DSC (Direct Software Control)
Use the DSC function to customise
certain programmable, basic settings
to suit your personal needs and prefer-
ences. See chapter “DSC program-
ming” for more information.
C GEO
To adjust the balance (left/right) and
fader (front/rear) with the rocker
switch.
Fader front
Fader rear
Balance left
Balance right
The last setting will be stored automat-
ically.
To switch off GEO: Press button once
again.
If the setting remains unchanged with-
in four seconds, the display will switch
back to the previous condition.
D AUD
To adjust the treble and bass frequen-
cies with the rocker switch.
Treble +
Treble –
Bass –
Bass +
The last setting will be stored automat-
ically.
To switch off AUD: Press button once
again.
If the setting remains unchanged with-
in four seconds, the AUD setting will
be terminated automatically.
Extra function AUD
Loudness: When listening at a low lev-
el, the Loudness function will create a
more natural sound by emphasising
the low frequency range.
To switch the Loudness on/off:
Press the AUD button for approximate-
ly two seconds until you hear a beep.
Toronto RDM126 us-gb® 24.04.2002, 14:33 Uhr10