Operating instructions

11
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Installation
If you would like to install your new car ster-
eo yourself or add other audio components
to existing ones, then please read carefully
the enclosed instructions on installation and
connection.
In order to ensure that the set operates prop-
erly it is necessary that the positive power
supply line is connected via the ignition and
the permanent +12 V lead.
Do not ground the loudspeaker outputs!
Telephone mute
If you have a mobile telephone installed in
your vehicle, radio or CD playback can be
muted automatically when using the phone
(telephone mute).
“PHONE” will then appear in the display.
Accessories
Use only the accessories and spare parts
approved by Blaupunkt.
You can use the following Blaupunkt prod-
ucts with this car stereo:
Changer
CDC A 05 or CDC A 071
The Loudness function is active if “LD”
appears in the display.
For more information see chapter
“DSC programming”.
Important notes
Precautions
Before starting to use your new car radio,
please read the following information care-
fully.
Traffic safety
As the driver of a motor vehicle, it is your
responsibility to pay attention to the traffic
situation at all times. Never use your car
radio in a way that could distract you.
Please keep in mind that you travel a dis-
tance of 15 yards per second at a speed of
only 30 miles per hour.
Should the traffic situation become particu-
larly demanding, we advise you not to use
the radio.
Always make sure that you are still able to
hear any warning signals coming from out-
side of the vehicle, such as police or fire
engine sirens, so that you can react accord-
ingly.
Therefore, you should always select a mod-
erate volume for playing your car radio while
you are driving.
Toronto RDM126 us-gb® 24.04.2002, 14:33 Uhr11