Full Product Manual
4
Remote FCC Compliance:
This device complies with Part 15 of FCC Rules. Operation is subject to the following two
conditions: 1. this device may not cause harmful interference, and 2. this device must accept any
interference received, including interference that may cause undesired operation.
t Timer: Press to turn the internal 6/18 timer on or o. It will blink twice to signal that
the timer is o and blink three times to signal that it is back on.
t Laser: Press to turn the laser light on or o.
t LED: Press to turn the LED light on or o.
t Fade: This mode fades the LED through an individual color of your choosing. Simply
choose the desired LED color and press Fade. To deactivate this mode, press the Fade
button again. The LED will now be on a solid color with no eect.
t 'MBTIThis mode ashes the LED through the each of the 16 LED light colors. To
deactivate this mode, press the Flash button again. The LED will now be on a solid
color with no eect.
t Morph: This mode softly morphs the LED through each of the 16 LED colors. To
deactivate this mode, press the Morph button again. The LED will now be on a solid
color with no eect.
t $PMPS-&%4FMFDUJPOPress through the colors to match the LED color you desire.
REMOTE CONTROL FUNCTIONS
-&%0/0''
5*.&30/0''
.031)
$0-034&-&$5*0/
FADE
-"4&30/0''
'-"4)
LASERTIMER
R G B W
FAD E
FLASH MORPH
LED
OPERATING THE REMOTE CONTROL
Use the included infrared remote control to operate
the light’s features. Infrared signal does not go through
solid objects, such as windows, walls, trees, shrubs, etc.
Make sure there is a clear line of sight between you and
the xture. Point the remote control at the FACE of the
light xture, where the receiver is located. The remote
operates up to 15’ (4.6 m) of unobstructed distance
away from the face of the xture.
Direct line of sight
15’ (4.6 m)