Full Product Manual

5
PRECAUTIONARY TIPS FOR THE REMOTE CONTROL
t The remote control should be kept dry and away from heat sources. Avoid humidity. If
the device responds erratically to the remote control, or doesn’t respond at all, check
the battery.
t Do not subject the remote control to undue physical stress, such as striking or
dropping it.
t Do not attempt to clean the remote control with a volatile solvent. Wipe it with a clean,
damp, soft cloth when cleaning.
PRECAUTIONARY TIPS FOR BATTERY INSTALLATION
t Do not ingest the batteries.
t Non-rechargeable batteries are not to be recharged.
t Batteries are to be inserted with the correct polarity.
t Exhausted batteries are to be removed from the product.
t Do not mix old and new batteries. Install only new batteries of the same type.
t Do not mix Alkaline, standard (carbon zinc), or rechargeable (NiCad, NiMH, etc)
batteries.
t Only use AAA batteries.
t Failure to insert batteries in the correct polarity, as indicated in the battery
compartment, may shorten the life of the batteries or cause batteries to leak.
t Do not take the batteries apart, heat them, or throw them into a re.
t Keep the batteries away from children and pets.
t When not using the remote control for a long period of time, remove and store
batteries in a cool, dry place at room temperature.
BATTERY DISPOSAL
Please, always dispose of batteries at a suitable recycling point.
Note: Batteries should be recycled or disposed of as per state/provincial and local
guidelines.
INSTALLATION TIPS
t Do not connect the light to a dimmer pack, as a dimmer accessory may damage
the laser component.
t Use only the manufacturer-provided UL/CUL power supply.
t Limit the use of extension cords. If you need an extension cord, use only UL, CUL, or
CSA approved 3rd party extension cords. When using outdoors, ONLY use extension
cords that are weather resistant, such as waterproof cords.
t The darker the display area, the brighter your projection will appear. Try to avoid
display areas with strong ambient light sources, such as commercial street lights or
bright security ood lights.
t If you choose to mount the BlissLights for downlighting (e.g. from balcony railing,
fence line, roof line, etc.), it is recommended that, for safety purposes, your lights are
properly mounted using a suitable hanging clamp and safety cable.