Installation

CONFIDENTIAL
35
Preparing the Water Hose and the Power Plug
You will need a hose with a minimum length of 60" (1.5 meters) and a diameter of ¼" for water connections of the
product during installation. A connector that has a thread with an external diameter of ¼ must be used to connect
the hose end to the product.
Connect the water hose to the mains, extend it and tape it to the ground.
The mains cable is provided externally with the product. First of all, connect the mains cable to the socket.
You can apply the method below to prevent the cable from getting jammed.
Use the Cable Clamp (29) and screw (30) to fix the cable connected to the socket to a level approximately
35" (890 mm) higher than the ground.