User manual

➀
➁
➂
➃
➄
➆
➅
➀ = Control panel
➁ = Drawer for storage and
freezing fresh food
➂ = Drawer for storage and
freezing fresh food
➃ = Drawer for storage
➄ = Drawer for storage
➅ = Thermometer
➆ = Rating plate
The freezer has stops to prevent the drawers from falling out when fully extended.
To remove the drawers (e.g. for cleaning purposes), pull them out as far as the stops, lift and extract.
Electrical Connection
The plug socket necessary for connection of your appliance to the electri-
city supply should be positioned so that it is possible to pull out the appli-
ance plug.
24
A concealed protective contact plug socket requires 10 A/16 A fusing.
If the socket is not accessible, the electrical installation must include suitable means of isolating the
appliance from the mains (e.g. fuse, cut-out, current trip or similar with a minimum contact separation
of 3 mm).
Before initial start-up, refer to the appliance serial plate to ascertain if supply voltage and current values
correspond with those of the mains at the installation location.
e.g.: AC 220 ... 240 V 50 Hz or
220 ... 240 V ~50 Hz
(i.e. 220 to 240 volts alternating current, 50 Hertz)
The rating plate is inside the appliance on the left.
☞
Description of the appliance
View of the appliance