Instruction manual

Instruction ManualGB
9
Repositioning the doors (Fig. 7)
1- Switch off at the socket outlet and pull out the mains plug.
2- Remove all food, loose items and fittings from inside the appliance and door 
shelves.
3- Unscrew the bolts and remove the middle hinge while holding doors. (1)
4- Remove the fresh food compartment door from the top hinge by sliding 
down and pulling front. (2)
5- Remove the freezer compartment door by pulling up. (3)
6- Remove the plastic cover and fit the tap which is in the IB bag to the other 
side. (4)
7- Unscrew the bolts of the top hinge and remove top hinge (5)
8- Reposition plugs on the opposite side. (6)
9- Carefully lay the appliance on its back. (7) (You may need somebody to 
help you.)
10-Unscrew and remove the left hand side front feet. (8)
11-Unscrew and remove the bottom hinge. (9)
12- Reposition the plastic covers on top of fresh food door to the opposite side .
(10)
13- Unscrew and remove the middle hinge bushing from fresh food door. (11)
14-Screw and fix the new middle hinge bushing which is supplied in IB bag to 
the other side. (12)
15- Reposition the hinge bushing and the tap on the freezer door. (13)
16-Fit the bottom hinge, if necessary adjust and tighten the bolts (14)
17-Fit the other feet and tighten the screws. (15)
18-Rotate the top hinge 180°. Unscrew the hinge pin and re-tighten it to the 
opposite side. (16)
19-Fit the top hinge and tighten the bolts. (17)
20-Fit the plastic cover on the front top trim. (18)
21-Locate the freezer door to the bottom hinge and attach to the cabinet. (19)
22-Locate the middle hinge on the freezer door (20) and put the fresh food
between the top and middle hinge carefully. (21)
23-Fit the middle hinge. Adjust the doors and tighten the bolts. (22)
24-Carefully stand your appliance (you may need somebody to help you) adjust 
the front feet.
25-Remove the plastic plugs on the doors. Unscrew the door handles. Reposition 
the door handles on the other side. Tighten the screws and fit the plastic 
plugs. (23)
26-Put back all, loose items and fittings.
27-Wait for at least 4 hours to allow the system to settle before switching on.