Manual

1. General Safety Requirements 4. Speed Reducer Break In
2. Warranty 5. Speed Reducer Installation
3. Maintenance & Repair 6. Speed Reducer Operation
(a)
Clean and Inspect
(a)
Automatic Safety Brake
T A B L E O F C O N T E N T S
(a)
Clean and Inspect
(a)
Automatic Safety Brake
(b) Oil Change Information
(c) Oil Level
(d) Recommended Gear Oil
(e) Attachments (parts list, assembly)
Please note that not all of the above
sections apply to each model purchased
Merchandise may not be returned without approval from factory. The customer will be charged for placing the returned
goods in salable condition plus a restocking charge of 25%. All returns must be shipped prepaid.
Sti 1
General Safety Requirements
S
ec
ti
on
1
General Safety Requirements
Take Note! This Safety Alert Symbol Found Throughout This
Manual Is Used To Call Your Attention To Instructions Involving
THIS SYMBOL MEANS
Attention!
Become Alert!
Follow These Instructions Can Result In Injury Or Death.
Become Alert!
Your Safety Is Involved
SIGNAL WORDS: Note the use of the signal words DANGER, WARNING AND CAUTION with the safety messages.
The appropriate signal word for each has been selected using the following guidelines:
DANGER: Indicates an imminently hazardous situation that, if not avoided, will result in death or serious injury. This
signal word is to be limited to the most extreme situations typically for machine components which, for functional
purposes, cannot be guarded.
WARNING: Indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury,
and includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe
practice.
CAUTION: Indicates a
p
otentiall
y
hazardous situation that
,
if not avoided
,
ma
y
result in minor or moderate in
j
ur
y
. It
Bloom Mfg Inc. 319-827-1139 319-827-1140 fax www.bloommfg.com
2
py , ,y jy
may also be used to alert against unsafe practices.