Life View 8.
Table of Contents Safety Information ....................................................... 3 Appearance and Key Functions .................................. 4 Introduction ................................................................. 5 Call Functions ............................................................. 6 Notifications Bar .......................................................... 7 Contacts ...................................................................... 8 Messaging ....................
Safety Information Please carefully read the terms below: Use Safely Do not use the tablet in situations where it might cause danger. Transportation Safety Please observe all transportation laws and regulations. Please drive with both hands on the wheel. DO NOT TEXT AND DRIVE Hospital Safety Please follow hospital rules and limitations. Please turn off your tablet when near medical instruments. Airport Safety Remember to follow all airport and flight safety regulations.
Appearance and Key Functions Front Camera Power Volume Rear Camera Speakers 4
Introduction Installation of the SIM Card Please keep the SIM card out of the reach of children. The SIM card and its contact are easily damaged due to scratching or bending. Please be cautious when carrying, installing or taking out the SIM card. Note: Please contact your cellular tablet service provider directly to obtain the SIM card. To insert SIM card: 1. Power off tablet and insert the SIM card. 2. Insert an SD card. (For additional storage capacity) Memory Card SIM Slot 3. Power on the tablet.
Call Functions At the dial keyboard, enter the phone number and then click the dial key. If dialing an extension, you may click the dial pad icon in the bottom of the screen to open the interface and enter the number of the extension. You may also press and hold the 0 key to add a (+) sign when adding an international dialing prefix. Call Logs Keypad Call Logs Every number called and received will be saved in the call log.
Notifications Bar The notification bar is the status bar located on the top of the screen which contains useful and important information regarding your tablet and applications that are installed. On the notification bar, several icons will appear such as signal bar, battery indicator, data indicator, Bluetooth and Wi-Fi. You may slide the notification bar down with your finger to display any pending notifications or actions.
Contacts Enter: Click on the applications menu and select contacts • The default display is the tablet contacts and SIM card contacts • The contacts are organized alphabetically by default. Add Contact Search Click the Search icon to enter the contact search interface. Any numbers or letters associated with any of the contacts saved in the list will be shown in the search results. If there were no matches for the inputted contact, the interface will display no contacts found. Add New Contact 1.
Contact Information Field Messaging You may use this function to exchange text messages and multimedia messages with your family and friends. The messages to and from the same contact or tablet number will be saved into a single conversation so you may see the entire message history conveniently. Send an SMS Application Menu » Messaging » New message (or use shortcut icon) 1. Click to enter recipient (You may enter contacts from contact book or enter a new number) 2. Compose Message 3.
Attachment Type for MMS Message Internet Browser Menu Functions Backward After browsing through multiple pages, this option will return the user to the previous page. Forward After browsing through multiple pages, this option will move to a web page after the current page. Windows You may view all windows open by clicking the windows icon in the upper right part of the browser. Bookmarks Click the save to Bookmarks option to make the current URL as a saved Bookmark.
Save for offline reading: Saves page for offline reading. Settings: Contains a variety of browser settings. Bluetooth & Wi-Fi Bluetooth is a short-range wireless communications technology that devices can use to exchange information and connect to different types of devices which include headsets, car kits, and other devices. Power on Bluetooth 1) Settings » Bluetooth and select ON to power on Bluetooth. 2) The Bluetooth icon will appear in the in the notification bar.
List of available devices Power on Wi-Fi 1) Settings » Wi-Fi and select ON to power on Wi-Fi 2) Click on the desired Wi-Fi network to be connected. Note: Unsecured networks can be connected to directly - Secured networks require a password or credentials prior to connection.
Camera Camera Prior to use: Install memory card before using the camera or video camera. All photos or videos taken are typically stored in the memory card for large storage capacity for images. Open Camera 1. Applications Menu » Camera 2. Select video mode if you want to record videos. Note: You may place a camera shortcut icon on any of the screens. Take Pictures 1. Aim the object that the picture will be taken. 2. Press the Shutter button on the screen. 3.
Gallery Open Images Applications Menu » Gallery List of different gallery albums Share Pictures You may share pictures by sending them through Gmail or the E-mail application. You may also send pictures through the MMS message function by composing a message and attaching the picture. Any image can also be sent via the Bluetooth function by selecting Bluetooth equipment that has been paired.
View Images In the picture interface, click on an album to view images In the photo album, scroll the picture towards left to view the next picture or towards right to view the previous one. Crop Pictures If you want to adjust the size of the picture, use the crop tools. Once the arrow appears, pinch your fingers in or out to adjust the size. If you want to adjust the image and keep its proportion, please hold down any of the four corners of the image and adjust accordingly.
Sound Recorder The Sound Recorder can record voice or any audio. You may send any recorded audio via Bluetooth or MMS and also have the option to make any recorded audio the tablets default ring tone. The recorder uses AMR, 3GPP and OGG format. Record - Keep the mic near the voice source. - Click the record button to record the audio. - Click the stop button to stop recording the audio. All recordings will be saved in my recording folder in the default music program.
Alarm Clock 1. Click on the Clock icon in the application menu 2. Click set alarm button and enter the alarm clock set interface where you may add and edit alarms Click to add, edit or delete alarms FM Radio FM Radio Through this function, you may listen to FM radio on the device. The FM radio uses the wired headset as an antenna in order to receive signal. Before using this function, connect the original equipment headset that came with the tablet.
Add Favorite Radio Stations Scan FM Radio as Background Click on the Home key to move the FM Radio to the background. Google Play Google Play allows you to download music, movies, and even games. Click the Play icon to sign in with your Google account.
Settings Wireless & Networks SIM Management Manage SIM and data information Wi-Fi Settings » Wi-Fi to power on. When on, the Wi-Fi will automatically search for available networks. Any unsecured network can be used directly and any secured network requires a password or credentials prior to connection. Bluetooth Press the switch to power on Bluetooth. Once on, the Bluetooth will automatically scan for any nearby open equipment.
View memory usage. Battery General power usage. Power Saving Mode Set different power saving settings. Apps Manage applications - Manage and delete installed applications. Running services - Press Force Stop to stop any of the services listed and removes from the running applications list. Personal Location High Accuracy – Use GPS, Wi-Fi and Mobile Networks (When Available). Battery Saving – Use Wi-Fi and Mobile Networks. Device Only – Use GPS only to determine location.
automatically prompt you enter the old PIN code and ask to enter a new PIN code twice. The tablet will then prompt you that the change was successful. If you enter the PIN incorrectly three times, the SIM and PIN codes will be automatically locked. You will need the PUK code to unlock the tablet which is available through your service provider. If you enter the PUK code incorrectly 10 times, the SIM card will be permanently locked. Please see your service provider for a new SIM card.
setting Schedule Power On & Off Schedule power on and off Accessibility Power button ends call Speak Passwords Web accessibility Printing You may print files via Cloud Ready printers. (Please check Google Cloud Print website for printer compatibility information) Developer Options If the tablet does not display Developer options press “Build number” seven (7) times in the about tablet tab in settings to access menu.
Storage Connect the tablet with the USB cable provided. Once connected, a connection interface will appear. Once in the connection mode interface, select MTP Media device or from the other options in the connection screen to transfer files.
Troubleshooting Below is a list of common problems that may occur. Try these easy troubleshooting steps to resolve any type of issues you may encounter. The tablet does not power on Press and hold the power key until the startup sequence appears on the display. Check the battery level and ensure there is sufficient charge. The tablet does not respond after several minutes If the tablet has an internal battery, please press and hold the power button.
I cannot make calls Make sure that the number you dialed is correct and the dial key has been pressed. Use the full national area code when dialing out of your area or when abroad, use country-specific international access codes. I cannot receive calls Make sure that your tablet is connected to a network.
FCC Regulations This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
FCC RF Exposure Information (SAR) This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States. During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation of 0 mm.
For this device, the highest reported SAR value for usage against the head is 0.44 W/kg, for usage near the body is 1.15 W/kg. While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirements. SAR compliance for body operation is based on a separation distance of 0 mm between the unit and the human body.