Full Product Manual
WARNING! This product is not supplied with petrol-oil mixture in
the engine! Before operating this product it is essential to fill it with
petrol-oil mixture!
1. Mix a regular-grade unleaded petrol and a quality engine oil for air cooled 2-
stroke engines in the fuel mixing container (31) (Fig. 17).
2. Fill half the quantity of the petrol to be used into the container. Then add the
entire quantity of oil and shake the prepared fuel mixture. Add the remaining
quantity of petrol. Shake the fuel mixture thoroughly before filling the fuel tank.
3. Use an anti-oxidant added quality oil expressly labelled for air-cooled 2 stroke
engine use (JASO FC GRADE OIL or ISO EGC GRADE). Do not use BIA or
TWC (2 stroke water-cooling type) mixed oil.
4. The recommended mixing ratio for petrol:oil is 40:1.
100 ml + 2.5 ml =
40:1
200 ml + 5 ml =
300 ml + 7.5 ml =
400 ml + 10 ml =
Fig. 17
NOTE: Never mix fuel and oil directly in the tank of the product. Use
a fuel mixing container (31) that helps to ensure the correct mixing
ratio. Shake gently to ensure a thorough mix of fuel and oil.
5. Always use clean, fresh unleaded petrol.
6. Avoid getting dirt, dust or water in the fuel tank.
7. Unscrew and remove the fuel tank cap (24) (Fig. 18).
8. Fill correctly mixed fuel / oil into the tank using a fuel funnel fitted with a filter
to avoi
d debris entering the tank. Do not overfill. Leave a minimum 5 mm of
space between the top of the fuel and the inside edge of the tank to allow for
expansion (Fig. 19).
9. Wipe any spilled fuel with a soft cloth and reattach the fuel tank cap.
1-800-348-5004
DVTUPNFSTFSWJDF!GPDVTPOUPPMTDPN
31