Full Product Manual

1. To become proficient attend a recognised chain saw training course to learn

how to operate chain saws safely and effectively. Familiarise yourself with all

the controls and switches. Practise all movements with the product switched

off.

2. Always hold the product firmly with both hands. Front handle (6) with the left

hand and rear handle (1) with the right hand. Fully grip both handles at all

times during operation. Never operate the product using only one

hand.

3. Only use the product with a secure stance. Hold the product at the right-

hand side of your body (Fig. 25).

Fig. 25

4. Check the proper lubrication as described in section “Operating

instructions - Chain lubrication” before performing any cut.

5. Ensure the saw chain (7) is running at full speed before it makes contact with

the wood. Use the spiked bumper to secure the product onto the wood

before starting to cut and use it as a l

everag

e point while cutting (Fig. 26).

Fig. 26

6. Reset the spiked bumper at a low point when cutting thicker logs by pulling

the product slightly backwards until the gripping teeth release, and reposition

at lower level to continue sawing. Do not remove the product completely

from the wood.

7. Do not force the saw chain while cutting, let the chain do the work, using the

gripping teeth to apply minimal leverage pressure.

1-800-348-5004

DVTUPNFSTFSWJDF!GPDVTPOUPPMTDPN